Signatures can be added anywhere an image field is available, including cover pages, report bodies, summaries, or stationary. In Home Inspector Pro, signatures can be created within the program, or imported from an image file.
To create an inspector signature:
1. Go to Report Settings → Inspector Signature
2. Click on Create Signature
3. Press and hold the mouse down to trace your signature in the small white pop up box.
If you are satisfied with the look of the signature, click Save and Exit. To start over and trace a new signature, click on the red x or circle at the top of the window and then select No and then return to step 2.
4. Verify that the signature looks correct. If you are finished, click OK. To try again, select Remove Signature and repeat steps 2-3.
To import an inspector signature:
1. Go to Report Settings → Inspector Signature
2. Then, click on Add External Signature
3. Navigate to the location on your computer where the image of your signature has been saved. (The file must be in a gif, jpeg, or png format)
4. Click on the file to select it, and press Open
5. If you are satisfied with the signature, click OK. If you would like to select a different file and replace the imported signature, select Remove Signature return to step 2.
